CAESARSTONE QUARTZ WORKTOPS SUPPLIED & FITTED NEWBURY, BERKSHIRE

Quartz has been a leading choice for worktops for many years, favoured for the complex range of styles and finishes available, and it’s hard-wearing durability.

Features of Quartz

• Wide selection of attractive and modern styles to choose from
• Strong & Durable work surface
• Scratch resistant worktops
• Easy to clean & maintain
• Non-porous & hygienic
• Stain & heat resistant
• Crystalline quartz appearance
• Uniform in colour and thickness

Caesarstone® specialise in Quartz worktops, tracing their roots back to 1987 as a pioneer of the market. Their continual development over the years has resulted in a stunning range of surface designs in unique finishes and textures.

Their fame as a manufacturer is linked to their frequent collaboration with designers on prestigious and artistic projects, which has lead to appearances at Milan Design week and Toronto’s Interior Design Show.

Caesarstone® has three design collections: Supernatural, Ultranatural and the newly-launched award-winning Metropolital collection. Caesarstone® designs are available in Polished, Honed, Concrete and Rough.

Caesarstone® can be produced in 20mm or 30mm thicknesses, and is exclusive to installations arranged through our managed installation service.

Sheridan Apollo Quartz worktops come with a double bevel finish as standard, though this is only one of a range of finishes that can be completed by our team of specialised technicians, some of which can be completely transformative to the final appearance of your worktop.

While Double Bevel Edge is included in the linear metre price of a worktop, please note that all other edges will carry an additional charge.

Imperial, Full Bullnose, Single Ovolo, Milano & Venetian require a scribed joint.

Birds Beak, Milano and Venetian edges are only available in 20/20mm.

Please contact our sales team to ask about our exclusive “Deeper Downturn” manufacturing capabilities, offering from 60-100mm downturns in a limited range of colours.

Internal profile edges on double and single radius edge details other than bevelled edges must have a radius of at least 60mm. Bevel edges don’t have this constraint as they are hand finished.

The normal joint for these materials will be a standard Butt Joint ending with a 5mm overhang, with additional options of Flush Fitting Butt joints, or a Flush Fitting Mitred Joint.

Upstands refer to an engineered ‘back wall’ of a worktop, cut from the same style of worktop, and the same batch where possible. Products with strong patterns will not have direct continuation onto this upstand section, though we will endeavor to provide worktops with as close a match as can be achieved economically.

As standard, we offer upstands in 100mm, and 60mm (as below, respectively).

From our manufacturing facilities, we are able to produce worktop cutouts to high standards with minimal lead times. Our team of specialist machining and hand-tooling technicians work around the clock to produce hundreds of tailored quartz worktops every month.

When deciding on the layout of your cutouts, please bear the following in mind:-

• A minimum of 120mm is required between two hob cutouts
• A minimum of 50mm from the cutout to the front edge is required
• A minimum of 70mm is required between sink cutouts.

Drainer grooves can be machined into the surface during fabrication, creating a finishing touch for undermounted sinks.

• Helps prevent vacuum pressure beneath crockery left to dry
• May help in directing drainage, as opposed to a flat surface
• Aesthetic appearance

Drainer grooves as pictured can be either flat (3mm channels) or graduated (1-5mm), and are typically machined towards the small bowl in a worksurface installation, with either five or four channels.

Recessed Drainers provide a flat, 3mm ingressed worktop section, which is lower than the standard surface. This localises drips and spills into a dedicated area, making it easy to direct any overspill neatly into the basin.

Please note, that both drainer grooves and recessed drainers will have a comparatively duller finish than the finished worksurface, due to the machining processes involved.

Butt Corner Joint

Typically, a quartz worktop will be joined together with a Butt-Corner Joint for simplicity, material economy, and cost savings. To avoid sharp edges, this joint has a v-groove indentation on the surface.

Scribed Corner Joint

For more advanced edge details, such as Imperial, Bullnose, Ovolo, Milano & Venetian, a Scribed Corner Joint will be necessary. This ensures that the edge detail can be continued around the corner, as the inside corner produced allows both worktop segments to meet along the same 45 degree vertex. Quartz joints/notches are finished with a small arris to the top edge to remove sharp edges. Sealant is applied between the two pieces to prevent water ingression, it’s not used to fill the joint. The joint when completed will show a small V-Groove, as illustrated below.

We supply stainless sinks which can be delivered and installed with our worktops ready for plumbing.

When we at Vogue Worktops supply a worktop, we include with every order our Care & Maintenance kit which includes everything you need to keep your worktop in first class condition. Follow the instructions within for a trouble free, great looking worktop.

Introduction

Caesarstone ® is made from an amazing 93% quartz with the remaining 7% polymer binders and dyes

• Complete with polished finish.
• Ideal for vanity tops, worksurfaces, cladding etc.
• Extremely hard, 7 on the ‘Moh’s Hardness scale’.
• The quartz used coupled with highperformance, stain resistant polymers results in a durable, non-porous, chemical resistant surface.
• Because it is non-porous, it does not require sealants or waxes. Concrete or rough effect finishes may require more regular maintenance and cleaning.

Tolerance

Tolerance in Caesarstone ® is ±2mm

Joints

Caesarstone ® joints are finished with a small ariss to the top edge, silicone sealant is applied to prevent water ingression.

Thermal expansion

Due to thermal expansion Caesarstone® can expand up to 1mm per metre. A gap of at least 3mm should be left at each end of the worktop when fitted and filled with decorators caulk. When Caesarstone® is joined to other materials (such as glass, steel or wood) an elastic type of adhesive, for example polyurethane is required for expansion.

Overhangs and supports

Any overhang extending more than 300mm must be supported.

Hob & Sink cutouts

• A minimum of 120mm is required between two hob cutout.
• A minimum of 100mm is required between hob and sink cutouts.
• A minimum of 50mm is required between two sink cutouts.
• Sink cutouts are placed a minimum of 50mm from the worktop front edge.

Internal radius

Internal profile edges on all edge detail other than bevel edge must have a radius of at least 60mm. Bevel edges don’t have this constraint as they are hand finished.

Upstands

Upstands should ideally be 100mm high, as material less than this height is extremely fragile. Upstands are not normally cut from the same slab as the worksurfaces, therefore an exact colour match is not possible. Silestone® upstands are straight and rigid, gaps will be visible where there are variations in the wall profile.

Plastering or tiling should ideally be completed after the worksurface installation.

Scratches

Caesarstone ® is scratch resistant but not scratch proof. Small scratches less than 25mm in length are considered within tolerance by the manufacturer and are considered acceptable.

Stainless Steel Sinks

Please specify the preferred undermounting of Stainless Steel Sinks. Silicone sealant may be rendered ineffective when plumbing the sink in, it is important that the sink is re-sealed by the plumber, or the 12 months guarantee will be invalid if the work is not carried out.

If a waste disposal unit is fitted to an undermounted sink after installation, additional support will be required, otherwise your warranty may be invalidated.

Handling

For installations you will need to supply additional labour on orders which have worktops weighing above 150kg. Every additional 75kg requires an extra person to assist with lifting. Size of ‘scant’ or ‘slab’, is a major factor in selecting the maximum usable length of a work surface. Approximately 3m x 1.3m is the largest work surface we are able to manufacture, this may be drastically reduced if you require a cutout.

Due to the weight of Caesarstone, please ensure that your units are level and securely fixed.