CERAMICA WORKTOPS SUPPLIED & FITTED NEWBURY, BERKSHIRE

Features of Ceramicá™

Colour Variation

Ceramicá™ iS a sintered stone. Made from natural minerals, natural pigments for the colours, nothing harmful in the product. It is UV Fixed, no colour fade in natural light, insensitive to UV rays, consistency of colours.

Surface Appearance

Full bodied, as workable as natural stone, allows edge details and labours in the material.
Surface finish mechanically applied, Lux (polish), Satin (honed), exactly as a granite or marble.

Made from natural minerals, natural pigments for the colours, nothing harmful in the product.

• Stain resistant with anti-bacterial bio-care to surfaces.
• Heat resistant for hot pans, nom issues with thermal shock.
• Scratch resistant with natural polish and honed face.
• Large format slabs, nominal size 3400 x 1500mm, workable area subject to face finish.
• Three thickness available, 12-mm, 20-mm and 30-mm thick.
• Eco-Friendly, using resources for manufacture and is fully recyclable.

Ceramicá worktops come with a double bevel finish as standard.

Please contact our sales team to ask about our exclusive “Deeper Downturn” manufacturing capabilities, offering from 60-100mm downturns in a limited range of colours.

Internal profile edges on double and single radius edge details other than bevelled edges must have a radius of at least 60mm. Bevel edges don’t have this constraint as they are hand finished.

The normal joint for these materials will be a standard Butt Joint ending with a 5mm overhang, with additional options of Flush Fitting Butt joints, or a Flush Fitting Mitred Joint.

Upstands refer to an engineered ‘back wall’ of a worktop, cut from the same style of worktop, and the same batch where possible. Products with strong patterns will not have direct continuation onto this upstand section, though we will endeavor to provide worktops with as close a match as can be achieved economically.

As standard, we offer upstands in 100mm, and 60mm (as below, respectively).

From our manufacturing facilities, we are able to produce worktop cutouts to high standards with minimal lead times. Our team of specialist machining and hand-tooling technicians work around the clock to produce hundreds of tailored quartz worktops every month.

When deciding on the layout of your cutouts, please bear the following in mind:-

• A minimum of 120mm is required between two hob cutouts
• A minimum of 50mm from the cutout to the front edge is required
• A minimum of 70mm is required between sink cutouts.

We supply and install Axix sinks for Ceramicá worktops. These sinks use the same worktop material to create a square, colour matched bowl with a stainless steel bottom. By using the exact same material in the sink installation, designs can benefit from both continuity in appearance and the durability of Ceramicá.

Axix sink installed as part of an Apollo Ceramicá worktop.

Underside of an Axix Ceramicá sink installation.

Drainers are ideal for undermount sinks, allowing your chosen worktop style to transition fluidly into a dedicated functional surface.

Recessed Drainers provide an ingressed worktop section, which is lower than the standard surface. This localises drips and spills into an isolated area, directing any overspill neatly into the basin.

5 Groove Drainers by contrast have five channels, which direct liquid flow towards the basin. These have the distinct advantage of being compatible with heat protection rods, which allows hot crockery to be removed from the hob without damaging the worktop.

We supply stainless sinks which can be delivered and installed with our worktops ready for plumbing.

Butt Corner Joint

Typically, worktops will be joined together with a Butt-Corner Joint for simplicity, material economy, and cost savings. The high precision of our cutting process ensures this join is as seamless as possible.

Scribed Corner Joint

For more advanced edge details, such as Imperial, Bullnose, Ovolo, Milano & Venetian, a Scribed Corner Joint will be necessary. This ensures that the edge detail can be continued around the corner, as the inside corner produced allows both worktop segments to meet along the same 45 degree vertex.

When we at Vogue Worktops supply a worktop, we include with every order our Care & Maintenance kit which includes everything you need to keep your worktop in first class condition. Follow the instructions within for a trouble free, great looking worktop.

Introduction

Ceramicá™ worktops are a sintered stone that is made from natural minerals, natural pigments for the colours, it is both beautiful and elegant having a consistency not available in granite or marble and is available in in polished, honed or satin finish.

• Complete with polished finish.
• Ideal for vanity tops, worksurfaces, cladding etc.
• Extremely hard, 7 on the ‘Moh’s Hardness scale’.
• The quartz used coupled with highperformance, stain resistant polymers results in a durable, non-porous, chemical resistant surface.
• Ceramicá™ keeps its lustrous gloss and ultra-smooth surface without polishing. Because it is non-porous, it does not require sealants or waxes.

Joints

Ceramicá™ joints are finished with a small ariss to the top edge. Silicone sealant is applied to prevent water ingression.

Tolerance

Tolerance in Ceramicá™ is ±2mm

Thermal expansion

Due to thermal expansion Ceramicá™ can expand up to 1mm per metre. A gap of at least 3mm should be left at each end of the worktop when fitted and filled with decorators caulk. When Ceramicá&#x2122 is joined to other materials (such as glass, steel or wood) an elastic type of adhesive, for example polyurethane, is required for expansion.

Overhangs and supports

Any overhang extending more than 300mm must be supported.

Hob & Sink cutouts

• A minimum of 120mm is required between two hob cutout.
• A minimum of 100mm is required between hob and sink cutouts.
• A minimum of 50mm is required between two sink cutouts.
• Sink cutouts are placed a minimum 50mm from the worktop front edge.

Internal radius

Internal profile edges on all edge detail other than bevel edge must have a radius of at least 60mm. Bevel edges don’t have this constraint as they are hand finished.

Upstands

Upstands should ideally be 100mm high, as material less than this height is extremely fragile. Upstands are not normally cut from the same slab as the worksurfaces, therefore an exact colour match is not possible.

Ceramicá™ upstands are straight and rigid, gaps will be visible where there are variations in the wall profile. Plastering or tiling should ideally be completed after the worksurface installation.

Scratches

Ceramicá™ is scratch resistant but not scratch proof. Small scratches less than 25mm in length are considered within tolerance by the manufacturer and are considered acceptable.

Stainless Steel Sinks

Please specify the preferred undermounting of Stainless Steel Sinks. Silicone sealant may be rendered ineffective when plumbing the sink in, it is important that the sink is re-sealed by the plumber, or the 12 months guarantee will be invalid if the work is not carried out.

If a waste disposal unit is fitted to an undermounted sink after installation, additional support will be required, otherwise your warranty may be invalidated.

Handling

For installations you will need to supply additional labour on orders which have worktops weighing above 150kg. Every additional 75kg requires an extra person to assist with lifting.

Size of ‘scant’ or ‘slab’, is a major factor in selecting the maximum usable length of a work surface. Approximately 3m x 1.3m is the largest work surface we are able to manufacture, this may be drastically reduced if you require a cutout.

Due to the weight of  Ceramicá, please ensure that your units are level and securely fixed.